Netgear WN3000RP Setup | N300

With Netgear WN3000RP Setup, move around with your mobile devices and keep them connected by giving your existing WiFi coverage a boost. This small, easy-to-install wall-plug WiFi range extender also creates new WiFi connectivity for up to 1 wired device like a Smart TV, Blu-ray player, or game console.

Netgear N300 WN3000RP Setup boosts your existing WiFi network to places out of reach of your existing WiFi.

Hardware Features

The LEDs on the front show how the WN3000RP Extender is working.

• WPS: The LED indicates a wireless connection.
• PC to Extender: The LED is lit when the Extender is connected to a PC.
• Status: This LED is lit when the Extender is powered on.
• Link Rate: This LED indicates a wireless connection between the Extender and the router.

The side panel has the following features:

• On/Off button: Turns the device on and off.
• WPS button: Press the WPS button to wirelessly connect the Extender to your router or wireless adapter.
• Factory Reset button: To use this button, stick a paper clip into the reset hole and hold it until the Status LED flashes.
• Ethernet port: You can connect a computer or other device to this port as described in the User Manual.

Netgear N300 WN3000RP Setup

Netgear N300 WN3000RP Setup extends the wireless network to include the area outside the range of your existing WiFi network. Follow these steps to correctly set up www mywifiext net N300 Extender.

Netgear WN3000RP WiFi Extender Setup | N300

For Netgear WN3000RP WiFi extender setup using the Netgear installation assistant:

• Turn on your Netgear N300 WN3000RP extender.
• After that, plug the extender into an electrical outlet.
• Wait for the Power LED to light green.
• Connect your existing router to the WN3000RP N300 extender.
• Launch a web browser from a computer or mobile device and enter www.mywifiext.net.
• The Netgear installation assistant for www mywifiext net N300 displays.
• Follow the prompts to connect your extender to the existing WiFi network.
• Move your extender to a new location where you want.
• If you get no connection or a poor connection, move the extender closer to your router and try again until the Link Status LED lights white.
• After you find the best location for your extender, connect your client devices to the extended WiFi network.

Netgear WiFi Extender WN3000RP Setup

For Netgear WiFi extender WN3000RP Setup using WPS:

• Power on the WN3000RP N300 extender.
• Place the extender and WiFi router in the same room.
• Once done, plug your extender into an electrical outlet.
• Wait for the Power LED on WN3000RP to light green.
• Press the WPS button on the extender.
• If the Netgear WN3000RP Link Status LED lights white, the connection between your router and extender is good.

Note: If your router supports the 5 GHz band, your extender attempts to connect to the router’s 5 GHz band the first time you press the WPS button. If your extender did not connect to the router’s 5 GHz band the first time, it may result in a lot of issues during the Netgear N300 WN3000RP WiFi range extender setup. 

• Move your extender to a new location in the home.
• Take your WiFi-enabled computer or mobile device to the location with poor WiFi router coverage.
• Connect your WiFi-enabled computer or mobile device to the extended network.

That’s how you can complete your Netgear N300 WN3000RP Range Extender Setup using the WPS button. If you come across any type of technical issue during the Netgear WN3000RP booster setup process, feel free to contact the experts.

Netgear WN3000RP Booster Setup

FastLane Technology provides you with maximum WiFi performance. Basically, it offers a high-speed WiFi connection with a dedicated band connecting the WiFi router to your N300 WN3000RP extender and a second band connecting the WiFi device and extender. Please follow these steps to configure FastLane Technology on your Netgear Extender:

• Connect your Netgear N300 WN3000RP extender to the router.
• After that, open any web browser such as Microsoft Edge, Google Chrome, or Internet Explorer.
• Type mywifiext.net in the address bar and press Enter key for www mywifiext net N300 setup.
• Enter the username and password when the login window appears.
• On the Netgear Genie page, click on ‘Do More’ and then on ‘FastLane’ option.
• Now, you will get two options: ‘Device-to-extender in 2.4 GHz only and extender-to-router in 5 GHz only’ and ‘Device-to-extender in 5 GHz only and extender-to-router in 2.4 GHz’.
• Select any option you like and click on the Save button.

Netgear N300 WN3000RP Booster Setup

Netgear WN3000RP WiFi Range Extender Setup

Go through the below-mentioned troubleshooting steps to fix Netgear WN3000RP WiFi range extender setup issues:

• Make sure that the extender is receiving proper power supply from the wall outlet.
• Confirm that the wall plug in which the extender is plugged in is not damaged or short-circuited.
• Access high-speed internet connection on your device.
• Check all the wired connections. Do not use any damaged cable.
• Keep your extender away from walls, room corners, microwave ovens, fish tanks, cordless phones, Bluetooth devices, metal objects, aluminum studs, etc.
• If you are getting issues with mywifiext.net, be certain that you entered the correct URL in the address bar.
• Power-cycle your Netgear extender once and try to set it up again.
• Use only the latest version of a web browser during mywifiext.net login.
• Update the latest Netgear firmware version on your extender.
• Reset the extender to its factory default settings.